arrow--boxarrow--northeastarrow--rightcart--addcartcheckmarkchevron--rightclosedownloadfacebookfaxhamburgerinstagramlinkedinlocationmailpausephoneplaysearchuserx-twitteryoutubezoomcombsrings
Skip to main content
3D Rohrprofilierung

3D pipe profiling

In line with market requirements, Hoberg & Driesch Stahlrohr has a CNC-controlled 3D tube profile cutting system at its disposal.

With our system, we process round tubes with outside diameters from 101.6 to 1422 mm and wall thicknesses from 5 to 100 mm by thermal cutting; for wall thicknesses up to 50 mm by plasma cutting and beyond that by oxyfuel cutting. Depending on the outside diameter, we can achieve production lengths of up to 16 m.

Due to the degrees of freedom, the system can produce customer-specific special cuts, contours, penetrations, multiple intersections, miters and slots. Appropriate weld seam preparations can easily be incorporated into the machining process.

Possible applications

With the production of flame-cut parts on a CNC system, we offer our customers advantages compared to conventional production in terms of

  • Reduction of manual effort
  • Greater variety of components with a shorter throughput time
  • Higher quality and repeat accuracy during production

Flame-cut parts from our company are already being used in the fields of mechanical and plant engineering and steel construction in particular. It is of secondary importance whether these components are used, for example, as shells in boiler and mechanical engineering, in the area of trusses for steel construction or offshore structures.

  • Customized special cuts, contours, penetrations, multiple cuts, miters and slots
  • Reduction of manual effort
  • Higher quality and repeat accuracy
  • Greater variety of components with a shorter throughput time

Specifications

Wall thicknessesPlasma in the range 5 to 50 mm (torch swivel angle max. 45°)
Oxyfuel in the range 10 to 100 mm (torch swivel angle max. 67°)
Component lengthup to approx. 16 m (dim. OD > 559 mm max. approx. 14.50 m)
TolerancesLength tolerances (plasma up to max. 20 mm WD, higher WD and oxyfuel on request):
AD≤508mm+/-2mm+0.3mm/m
AD559-762mm+/-3mm+0.3mm/m
AD813-1,422mm+/-4mm+0.3mm/m
Angle: +/- 1°
Other tolerances must be agreed on a case-by-case basis
Contact person

Do you have any questions about the product?

Get in touch with us!

Contact