arrow--boxarrow--northeastarrow--rightcart--addcartcheckmarkchevron--rightclosedownloadfacebookfaxhamburgerinstagramlinkedinlocationmailpausephoneplaysearchuserx-twitteryoutubezoomcombsrings
Skip to main content

Flexible as required. Made to measure.

Our processing options are as extensive as our product range. With modern, high-performance sawing, deburring and washing systems, cut-off benches as well as chamfering and turning machines, Hoberg & Driesch and its qualified employees realize the highest customer requirements for the steel trade. The tubes ordered are cut directly to individual requirements - so you receive perfectly ready-to-install sawn parts, you have no residual lengths and no material waste. You supply the drawing and we will adapt the steel tubes to semi-finished products in accordance with the drawing in more in-depth processing steps.

Fixed length cutting

Any type of dimension from our product range can be cut to fixed lengths in our machining center. These can be individually checked for compliance with the customer's length specifications and documented on request, meaning that they can be used directly in production without any further post-processing.

Series cuts

We use extremely high-performance processing units to implement series cuts. And even particularly tight tolerances and high demands in terms of surface-friendly treatment are a matter of course for us.

Peeling and roller burnishing

We manufacture cylinder tubes to the highest quality standards on our own peeling and roller burnishing line. We rely exclusively on primary material from leading manufacturers.

Internal and external machining

  • Sawing of fixed lengths for pipe diameters ≤ DN 800
  • Oxy-fuel cutting of fixed lengths for pipe diameters > DN 800
  • Contour cuts for steel construction, pipeline construction and the offshore sector
  • Color coatings accor­ding to the required standards and customer specifications
  • Multi-layer coating systems
  • PE coating in accordance with DIN 30670 / DIN EN ISO 21809
  • PP coating in accordance with DIN 30678
  • ZM lining in accordance with EN 10298 / DVGW W347
  • Epoxy linings for gas and water media
  • PUR coating
  • FZM coating as mechanical protection
  • GRP coating as mechanical protection
  • Chamfering of pipe ends
  • Drill holes accor­ding to customer specifications using a magnetic drilling machine

Special services

Through in-house processing and in cooperation with qualified partner companies, Hoberg & Driesch also offers you special services for the entire range accor­ding to your requirements, with additional approvals and the corresponding certificates.

  • Blast de-rusting in accordance with DIN EN ISO 12944, SA 2.5
  • Primer and top coats
  • Hot-dip galvanizing in accordance with DIN EN ISO 1461 and VDE regulations
  • Deburring and chamfering in accordance with DIN EN ISO 9692/1
  • Subsequent annealing, normalizing, soft annealing, stress relief annealing
Any questions?

Talk to us!

We would be happy to provide you with further information on our processing options.

Contact us